{ "id": "fusible-fleece-interfacing-roll", "sku": "fusible-fleece-interfacing-roll", "title": "Fusible Fleece Interfacing Roll", "slug": "fusible-fleece-interfacing-roll", "price": 70.99, "currency": "AUD", "availability": "in_stock", "category": "interfacing-and-wadding", "category_label": "Interfacing And Wadding", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "590 g", "images": [ "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/main-fusible-fleece-interfacing-roll.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-2.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-3.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-4.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-5.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-6.jpg", "https://fabricshop.au/dropship-images/interfacing-and-wadding/fusible-fleece-interfacing-roll/fusible-fleece-interfacing-roll-7.jpg" ], "description_short": "A heat-activated adhesive on one side helps add padding and body to bags, quilts and fabric home projects.", "description": "When fabric needs a little more body\n\nA fabric can look just right for a project yet feel too thin once you start sewing. A bag panel may seem limp. A small quilted piece may need padding, or a home sewing project may need more body than the outer fabric provides on its own.\n\nFusible fleece is one way to add that missing layer. It sits inside the project and gives the fabric a softer, padded feel. The adhesive helps attach it to a fabric layer before you carry on with construction.\n\nThis roll is listed for bags, quilts and home decor projects. The main question is whether your pattern needs soft support. If it calls for a stiff insert or a particular foam, do not assume fleece will produce the same result.\n\nHow the iron-on layer works\n\nThis heat activated fleece interfacing has adhesive on one side. Heat from an iron activates that adhesive so the fleece can bond to fabric. It combines a padding layer with an attachment method, rather than leaving you to manage a completely loose layer.\n\nThat does not mean every fabric will accept it in the same way. The outer fabric must tolerate the heat needed for application. Its surface and finish can also affect the result, which is why a scrap test matters.\n\nThe maker does not give an iron temperature, pressing duration or steam setting. Follow the directions supplied with the roll. General advice for another brand of iron on fleece for sewing should not replace instructions for the material in your hands.\n\nOnce applied, check the sample before moving on. Look at both sides, feel the fabric and let it cool before judging the bond.\n\nCheck the roll width before anything else\n\nThe maker lists this fusible fleece interfacing roll at 11.8 inches wide and 10 yards long. For many projects, the width is the first measurement to check. A long roll is still too narrow for a panel that must be cut as one wider piece.\n\nLay your pattern pieces on a table and measure the space they need. Include any allowances required by the pattern. If the fleece pieces are smaller than the outer fabric pieces, use the fleece cutting lines rather than guessing from the finished size.\n\nThe maker's description also lists product dimensions of 30 × 5 × 5 cm. Those are separate from the usable roll measurements. Do not use them to plan a flat cutting layout.\n\nA narrow fusible fleece roll may work well for smaller pieces and repeated panels. For a large project, check the full layout before buying rather than relying on the total length alone.\n\nMatch soft padding to the job\n\nBag making fleece is useful when your goal is added body with a padded feel. Think about how you want the finished item to behave. Should it bend easily, hold a soft shape or stand firm when empty?\n\nThose are different aims. Soft bag interfacing should not be treated as a promise of rigid walls. The outer fabric, lining, seams and pattern design all play a part in the final shape.\n\nRead the pattern's support requirements closely. If it names fusible fleece, compare the required grade with the product details. If it names another kind of support, find out why before making a swap.\n\nThe same care applies to interfacing for fabric baskets. Fleece may fit a softly shaped basket, but a design with upright, firm sides may need something else. Choose for the finished result, not just the project name.\n\nUnderstand the weight information\n\nThe maker mentions both light and medium weight options. The maker does not identify which grade is selected. It also does not provide thickness or weight per square metre.\n\nThe listed 590 g item weight cannot answer those questions. It is a separate product measurement, not a guide to the feel of one cut panel.\n\nIf your pattern needs a precise grade, confirm it before ordering. This is especially important when you are following tested instructions and want a close match to the sample shown.\n\nFibre content is also not specified. Avoid choosing on the assumption that the fleece is made from a particular fibre. If composition affects your buying decision or your care plan, ask for that detail first.\n\nMake a useful test sample\n\nA test piece should tell you more than whether the adhesive sticks. Use a scrap of your actual project fabric, not an unrelated offcut that behaves differently under heat.\n\nFollow the supplied application directions. Keep adhesive away from the iron soleplate, and check whether the instructions call for any protection during pressing. Do not add heat or extend the pressing time simply because the bond looks uncertain while still warm.\n\nAfter the sample cools, look for changes on the fabric face. Check the colour, surface and feel. Bend the piece as it would bend in the finished item.\n\nIf you plan to sew through several layers, build a small sample of that full stack. A single fused panel will not show you how a bulky seam or a lined corner will behave. A few minutes here can prevent wasted cutting later.\n\nPlan cuts before using the roll\n\nStart with the pattern's cutting list. Separate the fleece pieces from the outer fabric and lining pieces so you know exactly what the padded layer must cover.\n\nArrange those pieces within the listed roll width. Leave room for a test sample and any trimming your instructions require. You can then estimate the length needed from the roll with less guesswork.\n\nFor repeated padded fabric projects, keep a note of a successful layout. It can help you plan the next batch without measuring every piece again.\n\nKeep useful offcuts clean and separate from scraps that are too small. Before using an offcut, check that it covers the whole area needed. Do not assume piecing fleece is suitable unless your pattern allows it.\n\nThink about seams and construction\n\nPadding changes more than the middle of a fabric panel. It can also affect corners, folds and places where several seams meet. This is worth considering before you fuse every piece.\n\nFollow the pattern's advice about whether fleece belongs inside the seam allowance. Some designs need a full layer, while others call for a smaller support piece or trimmed edges.\n\nTest sewing through the planned layers before working on the finished item. Check that your stitch settings suit the complete stack and that the seam bends as expected.\n\nDo not force a thick area through the machine to keep moving. Pause and work out whether the bulk comes from the cutting plan or the construction method. An early adjustment is easier than unpicking a finished corner.\n\nUsing fleece in quilts and home projects\n\nFusible fleece for quilting can help when a pattern calls for an attached padded layer. Still, the word “quilting” covers many project sizes and methods. Check the pattern rather than treating every padded material as interchangeable.\n\nFor larger pieces, roll width needs close attention. A 10-yard length does not remove the limits of an 11.8-inch width. Any joins should be planned and supported by suitable instructions.\n\nFleece for home decor sewing needs the same thought. Consider how often the item will be handled, folded or washed. Then check whether soft padding is the right support for that use.\n\nThis product is listed for those broad project types, but the maker does not promise a particular finish for every design. Let the pattern and a sample guide the choice.\n\nCare starts with the whole project\n\nThe maker describes this as washable fusible fleece. That is useful for washable projects, but it is not a complete care label for the finished item.\n\nThe outer fabric, lining and other components must all suit the chosen cleaning method. One part may have a stricter limit than the fleece.\n\nSpecific washing temperatures, drying methods and dry cleaning guidance are not given by the maker by the maker. Check the instructions that come with the roll before laundering. Prewashing guidance is also absent, so do not assume the unused fleece should be washed before application.\n\nStore the remaining roll clean and dry, away from direct heat. Protect the adhesive surface from dust, and keep the supplied directions with the roll so they are easy to find next time.\n\nThe short version\n\nChoose this roll when your pattern calls for soft iron-on padding and its 11.8-inch width fits your pieces. The listed 10-yard length gives you material to plan across multiple cuts, but project yield depends on your layout.\n\nConfirm the fleece grade if it matters to your pattern. Test the heat application on your fabric, check a sewn sample and follow the supplied care directions. Those simple checks are the most useful way to decide whether this fleece belongs in your next project.", "llm_summary": "fusible fleece interfacing is a roll-format sewing layer for adding padding, body and stability to bags, quilts and home decor projects. It has a one-sided adhesive that activates with heat from an iron. The maker lists a usable width of 11.8 inches and length of 10 yards. Separate listed product dimensions are 30 × 5 × 5 cm, and item weight is 590 g. The maker specifications describe the colour as white and the fleece as machine washable. Light and medium weight options are mentioned, but the selected grade is not specified by the maker. Fibre composition, thickness, country of origin, exact pressing settings and detailed washing conditions are not specified.", "returnable": true, "return_policy": "Voluntary 14-day change-of-mind returns for fabric that is unwashed, uncut, unused and in its original packaging, buyer pays return postage; Australian Consumer Law consumer guarantees for faulty goods. Return postage on faulty goods is ours.", "shipping_profile": "standard", "warranty": null, "brand": "Fabric Shop Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://fabricshop.au/fusible-fleece-interfacing-roll/", "canonical_url": "https://fabricshop.au/fusible-fleece-interfacing-roll/", "json_url": "https://fabricshop.au/api/products/fusible-fleece-interfacing-roll.json", "updated_at": "2026-11-11" }